If there is any oil, wax, grease, dirt or similar residue on the surface, it may affect the tung oils ability to cure - so a thorough clean is important.
How to Apply
-Rub or brush oil into the timber. Lighter coats are better.
-On first coat, let it sit for 5 minutes after applying. Wipe on more oil to areas that become dull, as the oil soaks in.
-After 5 more minutes, wipe off any excess oil with another clean cloth and rub it back vigorously.
-Follow this procedure for each coat. Note: Some people prefer to wet sand between coats, however this is generally only for timber that is quite porous.
-Apply 3 coats. Best to wait 24 hours between coats. Apply more coats if desired or necessary.
-Hang out any rags or soak in water, rather than leaving scrunched up, as there is the potential for combustion.